login/register

Pinball Rehab

pinball repair and restoration

Solderless Quick Splice Connector Solderless Quick Splice Connector Hot

While it is best to solder splices when adding a pinball mod requiring a power source, a quick splice connector is a good alternative.  The connector uses the same approach as an IDC connector and is a good choice when soldering is not your strongest suite.

The wire you are splicing onto is placed in the first groove on the connector (no cutting of the wire required) and the new wire is inserted into the second groove.  Squeeze the connector shut and your done.  You can find them at Amazon or most auto stores.  For some reason Walmart sells the 3M brand in pink(?).

Just make sure to get the right size for the gauge wire you are using.