login/register

Pinball Rehab

pinball repair and restoration

Creating and Applying Water Slide Decals Creating and Applying Water Slide Decals Hot

You will find many cases where a water slide decal is the best way to repair pinball cabinet or playfield damage.  This approach is appropriate where the substrate (playfield or cabinet decal) is in good physical condition and you want to minimize the thickness of the decal.  For example, when the colors on a cabinet decal are faded.

Although you could do this repair with a stencil or silk screen it would require one stencil for the red and one for the black.  Plus I had a brand new wand scanner I'd purchased and was anxious to give it a try.

See Image 1 of the front of a Bram Soker's Dracula with major fading in the logo and the "Love Never Dies" text.  Note: Someone before me attempted to do some touch-up paint on the logo but apparently gave up before finishing.  The color wasn't a good match anyways.

See my article on Creating and Applying Vinyl Decals if you are removing and replacing a portion of a cabinet decal and need to replicate the thickness of the original decal.  That method is appropriate when a cabinet decal has been extremely damaged and needs to be cut out and replaced.

For more info, see Restoring Cabinet Graphics - Overview, which covers the different types of pinball cabinet graphics and provides an overview of the restoration process.  Links are then provided to individual articles (like this one) that cover each step of the process.  All of the detailed articles are also included in the Related Articles at the bottom of this page.

Image Gallery

Creating and Applying Water Slide Decals
Creating and Applying Water Slide Decals
Creating and Applying Water Slide Decals
Creating and Applying Water Slide Decals
Creating and Applying Water Slide Decals
Creating and Applying Water Slide Decals
Creating and Applying Water Slide Decals
Creating and Applying Water Slide Decals

Be aware that inkjet decals will fade more quickly than laserjet decals.  If you have an HP printer use their Vivera ink, which will have much better resistance to fading and perform more like a laserjet decal.  Other brands of printers may have similar products.

Inkjet decals also require a fixative, which may cause problems if you plan on auto clearing your playfield.  Some types of clear will also lift the ink on laser printed decals (lacquer for example).  If you are going to be applying a clear coat (other than acrylic), test it first on a sample decal.

Supplies

While you can pick up some of the necessary supplies at your local hobby or crafts store, Papilio Supplies manufacturers high quality, industrial grade products that you'll have much better success with.  The first thing you need is some water slide decal paper and Papilio sells an ultra-thin paper that is almost invisible. 

If you are using a laser printer, I recommend their Laser Water Slide Decal Paper (you will not need the fixative described below).

If you are using an inkjet printer purchase the Papilio Inkjet Water Slide Decal Paper.  This paper is specifically designed to absorb the ink and aid in making it waterproof (it does not resolve the issue, but serves as the first of a two step process).

You will also need their Decal Fixative which is the second step in waterproofing inkjet decals.  The Papilio product also includes a fine mist nozzle which theoretically provides better coverage.  I have also used Krylon Preserve It!, but have not had good luck with the other Krylon clear spray paints. 

Both water slide decal papers are available in clear and white. 

Papilio also sells a squeegee for smoothing out larger decals and removing air bubbles and water.  If you're working with large decals or having trouble positioning them you should also get some of their Decal Mounting Fluid.  This allows you to easily reposition the decal and increases the bond strength.

I would not do a decal without the mounting fluid, but that's up to you.

While a lot of people use Windex to make the decal re-positionable it does not strengthen the bond.

Surface Preparation

In order to achieve good adhesion with the decal you need a smooth, clean surface with a semi-gloss or gloss finish.  Most people skip this step, but it is critical.  You will not get a good bond on a matte finish.  If you're applying over a cabinet decal, since they typically have a glossy finish, all you need to do is clean the surface.

More than likely on playfields you will be dealing with a worn surface or possibly even bare wood.  Sand the area down smooth, seal any bare wood, and then apply a couple of coats of either gloss or semi-gloss clear paint before applying the decal.

Printing Decals

When printing decals always use your printer's photo quality setting.  This will provide a denser pigmentation application.  When printing samples for color matching always use photo paper, since it's cheaper than the decal paper, and print in photo mode.  If you don't your colors will be quite a bit different when printed on the decal paper.

Graphics should always be printed at twice the resolution that was used when editing.

Print your decals on the appropriate water slide decal paper as described above.  If you're using a laser printer you can skip the waterproofing section.  If you're using an inkjet printer you will need to finish the waterproofing process below.

In Image 2 you can see the decal I've created for the Dracula pinball using the VuPoint Magic Wand Scanner (see this article for more info) and edited with Corel Photo-Paint (see this article for more info).

When using Epson Claria or Durabrite inks with the Papilio water slide paper, Papilio's Inkfreeze Pigment Drying Agent is required. This fine powder absorbs excess ink and provides for proper drying.  Inks from other manufacturers (HP Vivera ink or Canon) may need additional drying time for the ink to fully cure.

You will probably notice the red in the attached images is slightly transparent.  This is partially because I printed my test decal in regular rather than photo mode, although you will always get some transparency with the clear decals. 

Normally this isn't an issue since you're putting red over red, for example, but if for some reason you're putting a light color over a dark color use the white decal paper.

Waterproofing Decals

Please note in advance this process can be a little finicky.  I've used the Papilio fixative before with good results but this time the color ran when I put the decal in water.  After having trouble with the Papilio I changed over to the Krylon product for this project.  Nine times out of ten you'll be fine with the following process, but if you're having trouble use more coats of paint or give the decal more drying time before applying the fixative and between coats.

First let the decal sit for at least 24 hours after printing.  Then apply a medium coat of the Krylon, wait 24 hours and apply a second coat.  Then let the decal sit for 24 hours before applying.  Yes, you can reduce the waiting periods, but do so at your own risk.

Applying Water Slide Decals

First we need to trim our decal, which should always be done after applying the fixative.  If you don't do it in this order the edges of the decal paper will absorb the fixative making it impossible to remove the decal.

Trim around the decal leaving a 1/4 inch border.  Round corners will show less than square corners.

This is also a good time to thoroughly clean the area with Mean Green or Simple Green and then brush on the decal mounting fluid.

Get a bowl slightly larger than the decal and fill it with warm water (not hot).  Place the decal printed side down in the water and let it soak for no more than a minute.  Just press down with your finger to keep the decal underwater.

After 10 to 20 seconds (depending on how warm the water is) you should be able to start sliding the decal off the backing.  Before you do that though, press the decal between two paper towels to remove any moisture.  Then hold the decal with your fingers on the backing side and your thumb on the decal side.  Push with your thumb and slide about 1/2" of decal off the backing (see Image 3). 

Do not touch the adhesive side of the decal with your finger or you will remove the glue.

At this point you have two choices.

I typically lay the exposed part of the decal on my target area and then while holding that part down with your finger or a brush (see Image 4) slowly pull away the rest of the backing paper as you lay the decal down. 

Others prefer to use an X-Acto knife.  Place the blade under the exposed part of the decal (see Image 5) and then while pressing against the blade with your finger, slide about half of the decal off the backing.  You can then place the decal into the target position and slide out the rest of the backing. 

I tend to get wrinkles with the X-Acto method, but some people find it easier to nail their positioning this way.  You could also use tweezers, but it's easy to tear the decal.

If you need to adjust the position of the decal, and you're using decal mounting fluid, just press lightly in the center of the decal with a couple of fingers and slide it into position.  You can also use a small brush (or two) to position the decal.  For larger decals place a finger at each corner and then gently slide the decal into position.

You can also lift one edge with the tip of an X-Acto knife and then slide the decal (see Image 6)

Once you're happy with the positioning you will need to press the decal down onto the surface while removing any air bubbles and moisture.  If you're having trouble with the edges of the sticker curling up from the surface it is typically because of poor surface preperation.  Using decal mounting fluid will minimize this problem.

Note: Always work from the center out.  For small decals just push down with your thumb and then roll it over like you were being fingerprinted (don't ask how I know that).  You could also use an artist's brush and work from the center out (see Image 7).

For larger decals using a squeegee is the best solution.  Hold two corners down with your fingers (this keeps the decal from sliding) and then wipe towards the opposite side.  Repeat from the opposite direction and dab off any excess water (don't rub).

Finishing Touches

Let the decal dry for at least 24 hours and apply a couple of coats of gloss or semi-gloss clear.  This will help blend the edges of the decal and protect it.  This is especially important on playfield decals.

For large decals, like a 6" square I did on a Pinbot, it's best to have the entire playfield done with automotive clear coat after applying the decal.

For spot clear coating, I  typically cut a hole in a piece of cardboard about 1.5 times larger than the decal.  Then hold the cardboard a couple of inches away from the cabinet or playfield while spraying.  Don't worry if your hand holding the cardboard moves around a little while you're spraying.  This will actually help you get a nice blended edge.

In Image 8 you can see the completed project.